|
The
Powerstax ZTAF is a cost effective and versatile way to provide
simple and effective interface for full brick DC-DC Converters
& Full brick PFC modules in your power system.
Ideal for industrial applications or bench testing, the unit
is supplied complete with a mounting kit for ease of installation.
Designed for the 500W, 350W and 200W version full brick modules,
the terminal adaptor is also available to suit the popular
triple out-put module DC-DC Converter.
For
more information on Powerstax heatsinks suitable for use with
the Full brick DC-DC converters - for all other Heatsinks please contact Powerstax
Sales. |
|
Powerstax
ZTAF Full brick Terminal Adaptor c/w mounting Kits and Heatsink
|
- Rating:
Max 40A
-
Plastic parts UL94VO
-
Wire Size: Recommendations for the Wire size and crimp terminals
on the ZTAF Terminal Adapter:
Signal and Vout (2-3) terminals: Stripped wire, AWG 20-18
(0,75mm² - 1mm²)
Main Power Vin and Vout terminals: Ring terminal, yellow:
M4/M5 (2,7 - 6,6mm²)
|
|
Multi-output
Converters: The triple output terminal adaptor includes
built in 3W rated 22V zener diodes to clamp the voltage of outputs
2 and 3.
This is to prevent undue voltage stress on the internal output
capacitors under
conditions where the load on the main
output is high and that on outputs 2 and 3 is light.
Efficiency: Use of the terminal
adaptor may reduce the overall
efficiency of converter by a small
margin. Please consult Powerstax for full details. |
|
|
