| Powerstax
- sole UK agency for the ELETRAFOR.
ELETRAFOR
TRASFORMATORI SRL (previously known as Ferg Group) provides a wide
range of a range of innovative and versatile transformers, along
with both custom and specials.
From
the 01 August 2008 Ferg have reverted to their origional trading
name of Eletrafor. Quality certified to ISO 9001, Eletrafor's two
production facilities of 1400 and 900 mq, are located near Lodi
in Italy. The first factory specialises in low power transformers
and reactors and with copper coatings. The other site primarily
produces efficient, big power transformers and reactors with aluminium
coatings.
Products include:
-
transformers,
- autotransformers,
- reactors
from 20VA up to 2000kVA
- protection
boxes and
- control
accessories
|
|
click
logo above to learn more about ELETRAFOR and their products |
|
|
| Listed
below are just some of the ELETRAFOR products and services Powerstax
can provide
NORMALISED
SERIES
Air cooled, 1 or 3 or trimonophase transformer from 1 to 1000kVA.
Copper or aluminium wingings and frequency of up to 1000Hz.
Insulation Class : H-F-B
Ambiental conditions: max.temperature 40°C or 50°C, humidity
95% without condensation, altitude 1500m over sea level
Insulation voltage : 3kV (power transformers), 5,5kV (isolating
transformers).
Standards: IEC76 e IEC 76 (power and distribution), EN 61558-2-2
(control), EN 51558-2-4 (isolating), EN 61558-2-6 (safety-isolating),
EN 61558-2-15 (autotransformers), EN 61558-2-15 (electromedical),
EN 60289 e EN 61558-2-20 (reactors), UL 506 e CSA 66/88 e Nema (for
North America), RINA (for naval applications)
Accessories include: protection more than IP00(with cover), thermal
and short circuit and overload protection, other characteristics
on demand. |
|
ELETRAFOR
Threephase normalised series with copper windings
|
|
|
| Power
Electronics
Similar to the normalised series but meeting standards: IEC76 e
IEC 76 (power and distribution), EN 61558-2-2 (control), EN 51558-2-4
(isolating), EN 61558-2-6 (safety-isolating), EN 61558-2-15 (autotransformers),
EN 60289 e EN 61558-2-20 (reactors)
Custom
and Specials
ELETRAFOR can offer a full range of bespoke transformer solution
for use in the following applications:
- control-rectifier-signals
circuits
-
separating and protection SELV-PELV-FELV lines
-
distribution
-
autotransformers to adapt voltages
-
reactor
-
phasing
-
short circuit current limiter
-
starter motors
|
|
Eletrafor single
phase transformer with integrated reactor |
|
|
